Shipping Note: Because this item has to ship by truck freight, the shipping costs for online orders will not be correct. You must email us or call us at 800 383-0195 to get actual shipping costs.
Note: This kit comes with an IronRidge XR series rail mount for the solar panels. There are many different types of mounts that can meet your needs but the most popular mounts for this quantity of modules is a rail mount system. Some of our customers prefer top-of-pole mounts and some prefer to build their own. If you're looking for the easiest method, we recommend going with a professional mounting system. This rail system is configured for two rows of three modules for six modules total. If you need a different configuration or you're interested in pole mounts, please contact us and we can design a mount to meet your specifications.
This kit is one of the easiest ways to get started with an off-grid solar system. It comes with 2,040 watts in solar modules, an Outback FLEXpower pre-wired inverter system for 60 Hz electrical systems and Crown flooded lead-acid deep cycle batteries. The inverter is capable of 3,500 watts at 120 volts AC and is powered with 24 volts DC. This system can be used as a stand-alone system or it can provide you with backup power if your main power source is lost. We recommend having a generator for multiple cloudy days so that the batteries do not drain too low. The Outback FLEXpower unit includes a basic battery capacity meter to help you see the level of charge in your batteries.
Wire Requirement: This wire is NOT included and must be purchased separately. The Outback FLEXpower One installation instructions calls for a minimum of #6 AWG or maximum of #4 AWG copper wire for the charge controller input. This is the wire that travels from the MNPV6 combiner box and connects to the FLEXpower One. Depending upon your installation method, you have a few choices for the wire. We sell the XLP #4 AWG and XLP #6 AWG in both black and red insulation. If you will be installing your wire inside electrical conduit, the XLP insulation may be a little overkill, and we recommend THHN type wire. We sell #6 THHN and #4 THHN AWG wire. THHN is a little cheaper but works great when installed in conduit. You will also need a bare copper wire for the ground connection. We sell it in #8 AWG and #6 AWG. Be sure of the length you need before you order! If you have any questions about wire or wiring methods, please email us or call and we will be happy to help you select the proper wire.
Note: Every solar system installation is different. While this kit contains almost everything you need, you will have to provide some of your own materials. For example, you may want to purchase some wire nuts for splicing wire (you may or may not need to splice wire depending upon your installation). You may also need to upgrade your kilowatt-hour meter or add an additional meter if your local electrical code requires it. The XRS mounting system will also require hardware for fastening the feet to the mounting surface.
Disclaimer: Please be aware of how much energy production you need to offset your energy use. If you draw down the charge on your batteries below 50%, you will most likely cause permanent damage to them. Batteries are too expensive to guess at the numbers. We cannot be held responsible if you choose a kit that is too small for your needs. If you have any questions or need help determining how much energy you need, please email us or call and one of our sales staff will be happy to help you.