High Amperage JLLN (class T) Fuses, High current DC Breakers
For inverters and other large DC loads
| These are high current DC fuses and breakers, and are generally used for inverter/battery protection, or other applications where a heavy DC load might be drawn. These are the same holders and fuses as used by a variety of manufactuers, including Magnum, Outback Power, and Midnite Solar. Class T inverter fuses are available with either bolt on terminals or cut cable type (see pictures). The cut cable type (CFB) are commonly used in RV's and marine, while the TFB (bolt on block) are commonly used in fixed installations. Xantrex has discontinued it's old DC breakers & disconnects, including the DC175, DC250 & the GJ disconnects (some stock may be available for replacement, call our sales office). For a substitute use the Midnite Solar DC disconnects. | |||||||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||||||
We accept all major credit cards, PayPal and eCheck (via PayPal). We ship to all states and Canadian provinces, and to about 40 other countries.
Our office hours are from 8 AM to 4 PM, Mountain Standard Time, Mon-Fri. We are closed for major holidays. If you are in the Flagstaff area, please stop by our store and visit - map link: Get Map to Store
|
- Unisolar
|
Northern Arizona Wind & Sun 4091 E Huntington Drive Flagstaff, AZ 86004 |
Copyright © 2012 Northern Arizona Wind & Sun. All Rights Reserved. Site Design by EYStudios. |