Kyocera KD140GX-LPU Multicrystalline Solar Module
The KD140 solar panel comes with two MC4 (latching) cable leads, you will need to purchase at least one
MC4 extension cable to plug into the connectors. For paralleling 2 or more of these panels, use the multibranch
connectors.
The Kyocera "KD" 140 watt solar panels are by far our most popular panels for smaller systems & RV solar installations. They are available in junction box versions for hard-wiring, and in MC locking cable versions. All may be wired in parallel for use with standard charge controllers, or in series for MPPT type charge controllers.
Specifications:
| Max Rated Power (Pmax) |
140 Watts |
| Voltage at Max Power (Vmpp) |
17.7 |
| Current at Max Power (Impp) |
7.91 Amps |
| Open Circuit Voltage (Voc) |
22.1 |
| Short Circuit Current (Isc) |
8.68 Amps |
| Length x Width x Depth (inches) |
59.06 x 26.3 x 1.8 |
| Weight of Panel (Pounds) |
27.6 |
| Connector Cable Type |
MC4 Latching Cables |
| |
|
Applications:
- Residential grid tie systems
- Large commercial grid tie systems
- Water pumping systems
- High voltage stand alone systems
- RV systems
- 12 volt battery charging systems
Warranty:
- 5 year limited warranty on material and workmanship
- 20 year limited warranty on power output
The newly developed treatment method processes multi-crystalline silicon cells in order to produce a surface texture that minimizes surface reflectance and maximizes output. The result is a maximum conversion efficiency of 16+ %, one of the highest conversion efficiencies in the polycrystalline module industry.
