Kyocera KD210GX-LFBS 210 Watt Multicrystalline Solar Module

Kyocera KD210GX-LFBS Multicrystalline Solar Module

Shipping Note: This item must ship by truck freight. You must email us for a shipping quote or call us at 800-383-0195 to get actual shipping costs.

Note: The LFBS model is electrically identical to the LPU model. The only differences are the LBFS cells are a lighter shade of blue and the module has a strengthening bar across the back of the frame for extra support.

The Kyocera KD210 solar panels are mainly intended for grid-tie systems, but may also be used for battery based systems if used with the Outback Power FM series, MidNite Solar Classic, Xantrex XW-SCC, or other MPPT charge controller that can take higher input voltages and convert it down to the correct battery voltage. Maximum power rating: 26.6 volts @ 7.9 amps. These are not compatible with the Enphase micro inverters.

Applications:

• Residential grid tie systems
• Large commercial grid tie systems
• Water pumping systems
• High voltage stand alone systems
• Large off-grid battery systems (with an MPPT controller)

Specifications:

• Number of Cells: 54
• Tolerance: +5%/-0%
• Vmp: 26.6 volts
• Imp: 7.9 amps
• Voc: 33.2 volts
• Isc: 8.58 amps
• 59.1" x 39.0" x 1.8"
• 39.7 lbs.
• MC4 locking connectors

Warranty:

• 5 year limited warranty on material and workmanship
• 20 year limited warranty on power output

This panel uses the MC4 (Solarline 2) latching type MC cable connectors.