Shurflo 9300 Submersible Pump For Wells up to 225 Foot Depth

Shurflo 9300 Submersible Well Pump 12/24VDC

The ShurFlo 9300 (9325-043-101) is a DC submersible well pump designed to pump water from 0 to 225 feet. Requires 4" or larger well casing. Runs off of 12 to 30 volts, intended primarily for panel-direct operation with a controller in the 20-30 volts range. 4.1 amps max. For best performance, especially in low light conditions a pump controller, such as the 902-100 or 902-200 should be used. For potable water only.

The 9300 delivers a steady 112 GPH (422 LPH) at its maximum lift of 230 feet (70M) when supplied with 24 VDC. Its unique water-tight power connector stops water wicking and prevents potential condensation problems. For livestock watering, irrigation, pond areation, remote homes and cabins.

Specifications:

• Motor: Permanent Magnet, Thermally Protected
• 24 Volts DC
• 120 Watts
• 4.0 Amps Max
• Fuse: 7.5 Amp Automotive
• Internal Bypass: 105-110 P.S.I. Max
• 12"L x 3.75"D
• 6 lbs.
• Maximum Lift: 230 feet
• Maximum Submersion: 100 feet

Note: Do NOT use any SHURflo pump for petrol gasoline, petroleum products, solvents, thinners or any other flammable liquid with a flash point below 82 C (180 F).

This pump requires a round cable. Submersible cable for the Shurflo 9300 can be found by clicking here. Flat submersible cable will not work with the 9300.

Warranty: 1 Year