Amphe-PV H4 Plus H4SMC6DM Cable Connector
Amphenol H4 Male Connector Contact and Housing
NOTE: The male and female designations refer to the metal contact, and not the plastic housing.
Part Number: H4SMC6DM
These connectors use the Stamped & Formed type of contacts.
This Amphenol male H4 connector comes with the housing and the metal crimp contact. It is intended for use with #10 AWG outdoor wire. These connectors must be crimped with an Amphenol H4 crimping tool in order to meet UL standards and pass inspection.
We recommend purchasing two of the Amphenol wrench tools for tightening these connectors. They are not necessary, but it makes assembly a lot easier and does not risk damaging the connector with pliers. One wrench tool is required to disconnect a male connector from a female connector.