Trimetric TM-2030-A Battery Monitor

Trimetric TM-2030-A Deep Cycle Battery Monitor

NOTE: This is only the monitor and is not a complete system. If you need all the individual parts that make up a complete system, including a charge controller, please see the BMS-TM-A-100 kit or the BMS-TM-A-500 kit. At a minimum, you will need a cable assembly and a 100A or 500A shunt to use the battery monitor. Please email us or give us a call if you have any questions.

NOTE: The meter pictured is shown with the optional mounting box. If you want to surface mount the TM-2030-A, you will need to purchase the mounting box separately.

The TM 2030 is intended to help maintain battery systems for 12V to 48V deep cycle batteries, such as ones found in RV's or off grid homes, which are regularly charged and discharged. It measures the rate of energy going in or out of your batteries so you can check your charging systems and see how much energy each of your appliances use. This is a big help when you're trying to conserve energy. The Trimetric will help you keep track of how charged or discharged your batteries are. It will let you discover if your charging systems are charging to the proper voltage, which is important for maximizing your battery life. The monitor will also tell you the number of days since the main battery system was fully charged, so if it hasn't been charged recently you can perform extra charging if necessary to help maintain the capacity of your batteries. The TM-2030 also can measure the voltage only of a second battery set, such as the starting battery, or solar voltage input to a charge controller.

The main difference between this model and the older TM-2025-A is that the TM-2030-A is capable of working in tandem with the new Bogart Engineering SC-2030 PWM solar charge controller. When the two units are used together, it increases the performance of the charge controller and can adjust the output to a level that is better suited to your batteries current state of charge.

3 year warranty