Iota Engineering DLS-240-55 55A DC Charger
NOTE: We offer quantity and dealer discounts on all Iota Engineering products. For more information about volume pricing, please email us or give us a call.
NOTE: This model is not available with a built-in IQ4 smart charger. However, it is compatible with the external IQ4 that plugs in to the DLS-240-30 charger. There is no difference in performance between a built-in vs external IQ4.
For charging 12 volt DC batteries or battery banks from a 240 volt AC power source.
Low and Transient AC Line Voltage Protection
Exceptionally Clean DC Output
Reverse Polarity Protection
Proportional Fan Control
The DLS-240-55 features a dual voltage jack which allows switching from a long-term float voltage of 13.6VDC to a 14.2VDC rapid charge by simply inserting the dual voltage plug (included) into the jack. The charger can accept input voltages between 220 volts AC and 240 volts AC.
The DLS-240-55 will also work with an external IQ4 Smart-Controller, providing "smart-charging" capability and increasing the performance of the DLS.
2 year warranty
SPECIFICATIONS DC Output Voltage (No Load) approx. 13.6V (DC) Output Voltage Tolerance (No Load) + or - .7% Output Amperage, Max Continuous 55 Amps Output Voltage (Full Load) approx. >13.4V (DC) Maximum Power Output, Continuous 750 Watts Ripple and Noise <50 mV rms Input Voltage Range 216-264V (AC) Input Voltage Frequency 47-63 Maximum AC Current @ 216VAC 6.7 Amps Typical Efficiency >80% Max Inrush Current, Single Cycle 30 Amps Short Circuit Protection Yes Overload Protection >100% Line Regulation 100 mV rms Load Regulation <1% Fan Control Proportional Thermal Protection YES Working Temperature Range 0° - 40°C Storage Temperature -20° to 80°C Withstand Voltage* 1700/1700/500 Dimensions 9.7" x 6.7" x 3.4" Weight 5.0 lbs
*Primary to Chassis/Primary to Secondary/Secondary to Chassis
- Additional Information
SKU DLS-240-55 Bundle Pre-Configured Price No