Iota DLS-240-27-40: 240 Volt AC Input, 24 Volt 40 Amp Battery Charger Without IQ4
Iota Engineering Standard DLS-240-27-40 40 Amp DC Charger
NOTE: We offer quantity and dealer discounts on all Iota Engineering products. For more information about volume pricing, please email us or give us a call.
NOTE: This model is not available with a built-in IQ4 smart charger. However, it is compatible with the external IQ4 that plugs in to the DLS-240-30 charger. There is no difference in performance between a built-in vs external IQ4.
For charging 24 volt DC batteries or battery banks from a 240 volt AC power source.
- Switch-Mode Technology
- Low and Transient AC Line Voltage Protection
- Exceptionally Clean DC Output
- Reverse Polarity Protection
- Proportional Fan Control
The DLS-240-27-40 features a dual voltage jack which allows switching from a long-term float voltage of 27.2VDC to a higher voltage rapid charge by simply inserting the dual voltage plug (included) into the jack. The charger can accept input voltages between 220 volts AC and 240 volts AC.
2 year warranty
|DC Output Voltage (No Load) approx.||27.2V (DC)|
|Output Voltage Tolerance (No Load)||+ or - .7%|
|Output Amperage, Max Continuous||40 Amps|
|Output Voltage (Full Load) approx.||>27.0V (DC)|
|Maximum Power Output, Continuous||1100 Watts|
|Ripple and Noise||<100 mV rms|
|Input Voltage Range||216-264V (AC)|
|Input Voltage Frequency||47-63|
|Maximum AC Current @ 216VAC||10 Amps|
|Max Inrush Current, Single Cycle||40 Amps|
|Short Circuit Protection||Yes|
|Line Regulation||100 mV rms|
|Working Temperature Range||0° - 40°C|
|Storage Temperature||-20° to 80°C|
|Dimensions||13" x 6.5" x 3.4"|
*Primary to Chassis/Primary to Secondary/Secondary to Chassis
Iota DLS-240-27-40 Specifications
Iota DLS-240-27-40 User Manual
Iota Technical Paper - Charging Lead Acid Batteries for Long Life
Iota Charger Wire Size Specifications Chart