Iota Engineering DLS-27-40 regulate Battery Charger
NOTE: We offer quantity and dealer discounts on all Iota Engineering products. For more information about volume pricing, please email us or give us a call.
NOTE: This model does not have the built-in IQ4 Smart Controller. If you want that model, please see item DLS-27-40/IQ4.
For charging 24 volt DC batteries or battery banks from a 120 volt AC power source.
The DLS 27-40 features a Two-Step Voltage Jack which allows switching from a long-term float voltage to an increased rapid charge by simply inserting the dual voltage plug (included) into the jack.
The DLS-27-40 Power Converter/Battery Charger from IOTA Engineering converts nominal 108-132 AC voltage to 27.2 DC voltage for both DC load operation and 24V battery charging.
As a power supply, the unit's tightly controlled regulation allows the user to operate a nominal 24VDC load up to 40 amps. As a battery charger, the unit will maintain the battery, delivering its full-rated current when the battery capacity falls sufficiently low. The voltage is set to deliver its maximum current for the necessary period of time to minimize undue stress to the battery caused by heating of its cells. This helps to ensure the longest possible life of the battery. Over time, as the battery nears its full capacity, the DLS-27-40 will automatically drop the current, providing a float-charge to the battery to prevent self-discharge of the cells.
DLS-27-40/IQ4 - The DLS-27-40/IQ4 features an internal IQ Smart Charge Controller which automatically provides three-stage battery charging for safer charging and longer life for your system's battery.