Iota IQ-54V: Plugin Controller for Iota DLS Series Chargers, 48 Volt Model
NOTE: The IQ-54V Controller is only designed to work with the DLS 48 Volt charger (DLS-54-13).
Iota IQ-54V 3-Stage Battery Charger Module, 48 Volt Model
NOTE: The IQ4 is designed for use with the DLS series converter/chargers. Some of the battery chargers we sell with this pre-installed, if you order one of those you do NOT need this.
The IQ4-54V is for the DLS-54-13 48 volt battery chargers.
The IQ4 Controller allows the DLS charger to operate as an automatic 3-stage "smart charger". This gives the customer the benefit of Bulk, Absorption, and Float stage charging, increasing the charging capacity of the DLS charger and decreasing charge times and insuring proper and safe battery charging. In addition, The IQ4 insures proper battery charging while minimizing over-charging. This "smarter" technology monitors the battery at all times. If the DLS voltage remains in the long term float stage more than 7 days, the IQ4 will automatically deliver an equalization charge for a predetermined time, then automatically return to the normal float stage.
Charging Phase Voltage Charge per Cell:
Bulk Charge 2.46
Absorption Charge 2.36
Float Charge 2.26
The batteries are charged from the full rated output of the DLS charger. During this stage, the batteries are recharged quickly to reduce charge times.
The batteries are then held in the absorption stage for a controlled period, insuring a full and complete charge. During this stage, the battery cells are equalized to 14.2vdc for increased capacity.
During the float stage, the DLS charge voltage is reduced to 13.6vdc. This minimizes gassing, while maintaining a full charge. If the battery voltage drops below 12.6vdc, the IQ4 will restart at the bulk charge stage and repeat this cycle.
If the batteries have not received a "smart charge" during a 7 day period, the IQ4 will switch the DLS charger into a pre-programmed, equalization stage to top off the batteries. This ensures full batteries all of the time without over-charging. IQ4 Controllers feature an installation jack plug. Simply plug the IQ4 Smart Controller into the Dual Voltage Jack on the top of the DLS unit. The smart-charge circuitry is then automatically engaged.