IronRidge BX-MB38-M1 38" Module Bonding Jumper
IronRidge BX-MB38-M1 Module Bonding Jumper
IronRidge BX-MB38-M1 Module Bonding Jumper to be used to bond modules that are adjacent to each other by clipping.
The 38" Bonding Jumper is an electrial bonding jumper that should be used for row to row bonding by securing Clips to inner flanges on long side of a module from each row, as shown. Tapping Clips into place may be required for modules with thicker flanges.
- Press-on installation
- Tin-plate copper wire
- Factory crimped connection