IronRidge XR-1000-SPLC-M1 Bonded Rail Splice

IronRidge XR1000 Bonded Rail Splice

The XR1000 bonded rail splice comes with a single splice bar and four self-tapping screws. The splice bar slides into the end of one section of rail, which allows you to slide an additional piece of rail onto the other end of the splice bar. Then the screws are used to fasten the rail and splice bar together. After installation is complete, you will have a near seamless appearance from one rail section to the next. The splice will not interfere with any of the panel clamps or the grounding equipment. XR Rail Splices are made with extruded 6000 series aluminum. 12-14 x 5/8” four self-drilling screws are included.