Kyocera KD145 SX-UFU 145 Watt Solar Module with Junction Box
Kyocera KD145 SX 145 Watt, 12 Volt Solar Panel with Junction Box
This solar panel cannot ship via USPS or Surepost. It can only ship via UPS Ground or expedited.
The Kyocera KD145 SX-UFU is the newest 12 volt module from Kyocera. It replaces the old KD135 and KD140 modules. This is the largest solar panel that can ship via UPS.
This solar panel is suitable for any off-grid solar powered battery charging system, including RV, remote home, or marine. The Kyocera KD145 is one of the few high power solar panels that's still available with a junction box, rather than the MC4 or H4 cables. The KD series junction box versions all have a 4" x 4" junction box with screw terminals on the back of the panel for wiring. This is a standard 12 volt panel suitable for almost any environment or application. New frame technology allows for end mounting under 2400 Pa (50 psf) or wind speeds of 130 mph (ASTM E1830) and traditional mounting under 5400 Pa (113 psf) to support increased snow load.
- UV stabilized, aesthetically pleasing black anodized frame
- Supported by all major mounting structure manufacturers
- Easily accessible grounding points on all four corners for fast installation
- Proven junction box technology
These cells are encapsulated between a tempered glass cover and a pottant with back sheet to provide efficient protection from the severest environmental conditions. The entire laminate is installed in an anodized aluminum frame to provide structural strength and ease of installation.
|Max Rated Power (Pmax)||145 Watts|
|Voltage at Max Power (Vmpp)||17.9 Volts|
|Current at Max Power (Impp)||8.11 Amps|
|Open Circuit Voltage (Voc)||22.3 Volts|
|Short Circuit Current (Isc)||8.78 Amps|
|Length x Width x Depth (inches)||59.06 x 26.3 x 1.81|
|Weight of Panel (Pounds)||27.6|
|Connector Cable Type||Standard Junction Box|
- 10 year limited warranty on material and workmanship
- 25 year limited warranty on power output
For the IronRidge XRS or XRL rail mount system:
- 1.81" end clamp (29-7000-214)
- 2.50" mid clamp (29-7000-108)