Kyocera KD150GX-LFU Multicrystalline Solar Module
This panel is no longer available. If you're looking for a similar panel, take a look at the Solarland SLP160S-12 160 Watt 12 Volt panel.
NOTE: The KD150GX solar panel comes with two SMK (latching) cable leads. you will need to purchase at least one extension cable to plug into the connectors.
The Kyocera "KD" solar panels are by far our most popular panels for smaller systems & RV solar installations. They are available in junction box versions for hard-wiring, and in MC locking cable versions. All may be wired in parallel for use with standard charge controllers, or in series for MPPT type charge controllers.
Max Rated Power (Pmax) 150 Watts Voltage at Max Power (Vmpp) 18.2 Volts Current at Max Power (Impp) 8.25 Amps Open Circuit Voltage (Voc) 22.5 Volts Short Circuit Current (Isc) 8.87 Amps Tolerance +10/-0 Length x Width x Depth (inches) 59.06 x 26.3 x 1.8 Weight of Panel (Pounds) 27.6 Connector Cable Type SMK Latching Cables
- Residential grid tie systems
- Large commercial grid tie systems
- Water pumping systems
- High voltage stand alone systems
- RV systems
- 12 volt battery charging systems
- 10 year limited warranty on material and workmanship
- 25 year limited warranty on power output
The newly developed treatment method processes multi-crystalline silicon cells in order to produce a surface texture that minimizes surface reflectance and maximizes output. The result is a maximum conversion efficiency of 16+ %, one of the highest conversion efficiencies in the polycrystalline module industry.
- Additional Information
SKU KD150GX-LFU Bundle Pre-Configured Price No