Magnum Energy ME-BMK-NS Battery Monitor Kit Without Shunt
Magnum Energy Battery Monitor Kit Without Shunt
NOTE: This version of the Magnum Battery Monitor Kit does not come with a shunt.
The ME-BMK (Battery Monitor Kit)* for Magnum Energy inverters gives you a fuel gauge type of meter for your battery bank. It monitors the battery bank and reports the percentage state of charge, real time amps, voltage, amp-hours in/out, and the minimum/maximum DC volts. The ME-BMK includes the sense module, sense and communication cables, and a 500 amp shunt.
* The ME-BMK-NS requires a Magnum inverter with a "Network" port and a ME-RC (revision 2.0 or higher) or ME-ARC remote control.
1.2 Identification and Compatibility
The ME-BMK is compatible with all Magnum inverters/chargers that have been provided with a Magnum Net or Network port (see Figure 2-1). The ME-BMK requires either an ME-RC50 (revision 2.0 or higher) remote, ME-ARC50 remote, or an ME-RTR router to access the available settings and features.
DC shunt 50mv/500 amp shunt (optional)
Twisted pair wire 5 length, 18 AWG wire
Communication cable 10 length, 2-conductor,telephone standard
1 year warranty