MidNite Solar MNDC125PLUS Mini DC Disconnect Power Center Plus with 125 Amp Breaker

Midnite Solar MNDC125 Mini-DC Power Center Plus, 125 Amp

White aluminum chassis with 125A/125VDC breaker. 10" x 5" x 18" The MNDC125-PLUS comes with a din rail for 5 additional DC breakers for DC loads, charge controller disconnect, battery status monitor feed etc. included is a ground bus, 5/16" bonding battery minus stud. Mounting holes for a 500 amp shunt are built in. The Mini-DC was designed to take into account many different types of renewable energy installations. The installation instructions will describe and show some of the more common possibilities.

Features:

• The PLUS units come with an extra DIN rail for mounting additional DC breakers
• Aluminum chassis. (no rust in the tropics or around salt water)
• Hinged door for easy access to electrical circuits
• Inverter breaker included (125, 175 or 250 amp)
• Din rail for DC circuits such as PV in, Chg Cntrl out, DC-GFP, DC loads, PV combiner
• Ground bus bar with 14 poles
• Six mounting spots for 500 amp, 50mV shunt
• Mounting spot for insulated bus bar (for PV negative connection point)
• Knock outs for inverter and battery cables, charge control mounting, DC & PV in & out
• 5/16" diameter stud for battery negative tie point
• ETL listed for US and Canada