Have Questions? Call (800) 383-0195 Contact Us
Need a Custom Quote? Go Now

Mini DC Disconnect Power Center with 250 Amp Breaker on Left Side

Mini DC Disconnect Power Center with 250 Amp Breaker on Left Side


Midnite Solar MNDC250-L Mini-DC Power Center, 250 Amp

White aluminum chassis with 250A/125VDC breaker that mounts on the left side of the enclosure. 10 X 5 X 18 The MNDC250-L comes with a din rail for 5 additional DIN rail mount or 3 panel mount DC breakers for DC loads, charge controller disconnect, battery status monitor feed etc. included is a ground bus, 5/16 bonding battery minus stud. Mounting holes for a 500 amp shunt are built in. The Mini-DC was designed to take into account many different types of renewable energy installations. The installation instructions will describe and show some of the more common possibilities.


  • Aluminum chassis. (no rust in the tropics or around salt water)
  • Hinged door for easy access to electrical circuits
  • Inverter breaker included (125, 175 or 250 amp)
  • Din rail for DC circuits such as PV in, Chg Cntrl out, DC-GFP, DC loads, PV combiner
  • Ground bus bar with 14 poles
  • Six mounting spots for 500 amp, 50mV shunt
  • Mounting spot for insulated bus bar (for PV negative connection point)
  • Knock outs for inverter and battery cables, charge control mounting, DC & PV in & out
  • 5/16 diameter stud for battery negative tie point
  • ETL listed for US and Canada
Additional Information

Additional Information

Bundle Pre-Configured Price N/A

MNDC User ManualMNDC User Manual