MidNite Solar MNSW2524-UPS Pre Wired Schneider Electric SW 2524 Inverter for UPS System

MidNite Solar MNSW2524-UPS

MidNite Solar pre-wired inverter systems offer a turn key solution to installing a battery based UPS (Power Back Up) system, saving you time in the field. With a pre-wired solution all of the confusion is taken out of selecting all the right parts. This system uses the Schneider Electric Conext SW inverter that is rated at 2,500 watts and uses a 24 volt battery. It produces 120/240 volts AC. Don't forget to look at other MidNite products that compliment the pre-wired inverter system like the MidNite Battery Boxes. MidNite pre wired systems can be configured in about any way needed with any of the common battery based inverters (except Outback).

FEATURES:

• Environmental Rating - Type 1 (Indoor)
• Schneider Electric Conext SW Pre-Wired 2524 120/240 vac Inverter for Off Grid
• Schneider System Control panel
• SW E-Panel
• MidNite Back Plate (MNSW-BP)
• AC Bypass Assembly
• Two MNSPD300's (Surge Protection Devices)
• 250 amp Battery Main Breaker for the SW Inverter
• All MidNite components have a 5 year warranty. Schneider Inverters and components in this system are covered by their manufacturer's Warranty.
• MidNite E-Panel and SPD's made in the USA
• Schneider SW Inverter made in India
• Listed by ETL for US & Canada.
• General labor for assembly, test and crating included

AC Bypass Assembly included

33"L x 20"W x 9"H, 114Lbs