Outback FLEXpower Three FP3 VFXR3648A-300 10,800 Watts 48 Volts for Off-Grid and Grid-Tie
Outback Power FLEXpower FP3 VFXR3648A-300 Pre-Wired Inverter System
This item ships by truck freight only. If you have any questions or concerns about freight shipping, please email us or give us a call at (800) 383-0195.
NOTE: This system incorporates the new FXR3648A-01 model inverter which replaced the FXR3648A. It's the same inverter but also conforms to the new UL 1741 SA as defined in California's Rule 21. This inverter qualifies to be installed anywhere in the United States, including California and Hawaii. You can read more about this in the OutBack Power Product Change Notice.
The Outback FLEXpower Three system comes fully assembled and tested from the Outback factory. The units are built to meet National Electric Code (NEC) standards and designed for ease of installation. FLEXpower FXR systems can be used for both off-grid and grid-tie configurations. The systems have been outfitted with all the necessary wiring, circuit breakers, communications, battery monitoring and PV ground fault protection. All equipment is ETL listed. The FLEXpower Three FXR Series is perfect for nearly any type of application: residential and commercial applications including cabins, vacation homes, farm buildings, remote communications sites and back-up power systems, with all necessary components integrated into a compact hang-on-the-wall system with a minimal footprint. The FLEXpower systems are designed for fast installation which cuts down on time and cost. The system comes with a mounting bracket that attaches to your wall, which then allows you to hang the FLEXpower system. This allows you to get up and running very quickly; simply connect the PV input, AC output, and battery connection.
- 10,800 Watts
- 48 Volts DC
- Three VFXR3648A-01 Pure Sine Wave Inverters with Advanced Charging
- 175 Amp DC Inverter Breakers/Disconnects
- MATE3 System Controller and Display
- FLEXnet DC Battery Monitor
- Two FLEXmax 100 Amp Charge Controllers With Remote Temp. Sensor
- HUB 10.3 Communications Manager
- FLEXware Surge Protector
- One Standard Electrical Outlet
- 120VAC Bypass Assembly
- AC and DC Electrical Enclosures
- Mounting Plate and Mounting Bracket
- Weight: 433
Warranty: 5 Years