Blue Sea DC Analog Ammeter 0 to 100 Amps for 12/24 Volts
The Blue Sea Systems DC ammeter model 8017 can be used on both 12 and 24 volt DC systems. It comes with the required 100 Amp, 50 mV shunt. The meter can be surface mounted or installed using one of the optional blank meter panel (item 8013). May be mounted in a 2.125" diameter round hole. Blue Sea Systems ammeters of 50 Ampere and greater capacity utilize an external shunt as the current sensing device. This shunt can be located in the wiring system to permit the shortest and most direct path between the source and the load. Small gauge wires connect from the shunt to the meter, which can be located conveniently for viewing. Signal wires: The meter movement requires only 1 mA of current to operate. We recommend 16 AWG conductor cable to assure adequate physical strength. Smaller conductors may be used if part of a multiconductor cable such as a shielded twisted pair signal cable.
- Face Size: 2.75"
- Voltage: 12 or 24 VDC
- Amps: 0-100
- Current: 1mA at full scale
- Weight: 0.54 lb.
- Additional Information
SKU BS-8017 Bundle Pre-Configured Price N/A
Customer ReviewsNo reviews have been found