Pole Mount Enclosure For 4 Concorde PVX-2160T Batteries
Pole Mount Enclosure for 4 Concorde PVX-2160T
The hinge cover enclosures are manufactured for common battery sizes made by Concorde and Deka (MK), although other non-listed batteries will also fit in the same enclosures. Ventilation louvers are punched on both sides - low on one side and high on the opposite side to promote convective flow to reduce internal temperature and remove gasses. Removable filters are located over the louvers to keep out dust and insects. The enclosures are manufactured with 0.125" 5052-H32 aluminum. All die marks and welds are sanded smooth. Boxes are finished with a reflective bright white polyester powder coat to minimize internal heat gain. All standard enclosures are built to meet NEMA 3R specifications but can be special ordered in NEMA 4 and NEMA 4X.
Dimensions: 16" x 16" x 34"
5 year warranty