Primus Wind Control Panel for 12V Air Breeze and Air 40 Turbines
Primus Wind Control Panel for 12 Volt Air Breeze and Air 40 Turbines
The Primus Windpower wind control panel makes the installation of your new wind turbine a breeze. It has a built-in current meter (ammeter), a stop switch, and a circuit breaker that also acts as a power switch. The panel has four total connection terminals: a negative (-) and positive (+) for the turbine connection and a negative and positive for the battery connection. The Air Breeze and Air 40 have charge regulators built-in to the unit. If you are planning to use the control panel for a turbine without built-in regulation, you will also need to connect a diversion load controller to the circuit. The device comes fully calibrated from the factory; no field adjustments are necessary.
- Part number: 2-ARAC-103
- 12 Volts DC
- 15 Amp meter
- 25 Amp circuit breaker
- For use on Air Breeze and Air 40 Turbines