Primus Wind Control Panel for 12V Air X Marine and Air 30 Turbines
Primus Wind Control Panel for 12 Volt Air X Marine and Air 30 Turbines
The Primus Windpower wind control panel makes the installation of your new wind turbine a breeze. It has a built-in current meter (ammeter), a stop switch, and a circuit breaker that also acts as a power switch. The panel has four total connection terminals: a negative (-) and positive (+) for the turbine connection and a negative and positive for the battery connection. The Air X Marine and Air 30 have charge regulators built-in to the unit. If you are planning to use the control panel for a turbine without built-in regulation, you will also need to connect a diversion load controller to the circuit. The device comes fully calibrated from the factory; no field adjustments are necessary.
- Part number: 2-ARAC-108
- 12 Volts DC
- 30 Amp meter
- 40 Amp circuit breaker
- For use on Air X Marine and Air 30 Turbines