Primus Wind Power 1-TWA-10-02 45 Foot AIR Guyed Tower Kit

45 Foot Guyed Tower Kit for AIR 30/40 Turbines

NOTE: This kit does not come with the pole or anchors. The type of anchors you need will depend upon the soil conditions at your tower site. This tower kit is designed specifically for the Primus Wind Power AIR 30 and AIR 40 wind turbines. To our knowledge this is the most economical and user friendly tower kit available for the AIR wind turbines. Guy wire supported construction allows the use of lightweight tubing while providing plenty of strength for all but hurricane conditions. The AIR tower kit includes a simple yet effective elbow/tee for its base. Combined with a short length of tubing this type of base eliminates the need for a concrete pad, base plate and a swivel for the base of the tower. A simple extruded aluminum, coupling clamp allows the use of a wide selection of different kinds of tubing, depending on availability, site requirements and customer preference. Threaded coupling points are eliminated, allowing lighter materials to be used with the same or greater strength than a threaded pipe tower. Pre-cut and swaged guy wires eliminate wire measuring and cutting. Kit Contents: (for more detailed information, please see the owner's manual)

Tower Base

Upper Guy Wire Set

Lower Guy Wire Set

Tower Base Staples

Bolts and Locknuts

Cable Thimbles

Cable Clamps

Tower Setup Kit