Outback FLEXware 1000-AC Enclosure The FLEXware 1000 accommodates all of the required protective devices in two enclosures with room for additional breakers and large AC and DC cable connections. The FW1000-AC and FW1000-DC enclosures are both designed to allow mounting in either a horizontal or vertical orientation to provide more installation flexibility and easier wiring connections. The FW1000 system uses two FLEXware MP mounting plates and one set of the optional DCA and ACA conduit adapters for each FX inverter installed. AC enclosure which mounts at the AC side of three or four FX Inverter/Chargers. Supports eight terminal bus bars and one FW-X240. Includes: Ground bus bar, two DIN mounting brackets and FLEXware 1000 wiring raceway. For applications with large power requirements such as large residential, commercial or village power systems. The FLEXware 1000 system architecture is capable of supporting up to four OutBack FX Series Inverter/Chargers, four MX60 Charge Controllers, and all the required AC and DC components and wiring. Utilizing a compact design, FLEXware 1000 AC and DC enclosures accommodate all of the essential protective devices with lots of room for additional breakers and large cable connections and can be mounted either vertically or horizontially.