Rennsteig H4 Connector Crimp Tool and Dies for Stamped and Formed (S&F) Contacts

Rennsteig H4 Connector Crimp Tool and Dies - 14, 12, & 10 AWG Wire

P/N 624 1175 3 1 RT

This Rennsteig professional H4 crimp tool will work with #14 #12, and #10 gauge stranded solar listed cable and H4 connectors. Don't settle for one of the cheap imitation brands that are not listed specifically for H4 connectors. When used properly, connectors crimped with this tool will meet all UL and NEC requirements.

This crimp tool is recommended for crimping of Amphenol H4 stamped and formed (S&F) contacts. The excellent handling, easy exchange of the crimping insert bits and the possibility of adding a positioning aid are facts in favor of these crimping pliers.

For male and female contacts.