S-5! S-5-H90 Clamp for Metal Roof Panels With a Horizontal Seam

S-5! S-5-H90 Roof Clamp for Horizontal Seams Greater Than 0.65 inches

The S-5-H90 is a one-piece clamp that was developed to securely and cost-effectively accommodate metal roof panels with a horizontal seam greater than 0.65". Turning the clamp 90 degrees so that the bolt hole side is facing up, slip the clamp on the seam and tighten the setscrews. After the clamp is installed, affix ancillary items using either of the two threaded bolt holes and bolt provided.