Have Questions? Call (800) 383-0195 Contact Us
Need a Custom Quote? Go Now

Samlex SMC-10 10 Amp PWM Solar Charge Controller for 12 and 24 Volts DC

Samlex SMC-10 10 Amp PWM Solar Charge Controller for 12 and 24 Volts DC


Samlex Solar 10 Amp PWM Solar Charge Controller for 12 and 24 Volt DC Systems

The Samlex SMC-10 is a pulse width modulation (PWM) solar charge controller designed for use with 12 and 24 Volt nominal solar panels and 12 and 24 Volt flooded or sealed AGM lead acid batteries. The controller has built in protection for overload, over temperature, under voltage, over voltage, and reverse polarity. You can also use the load terminals for powering devices up to 10 Amps. Using the load terminals will also prevent the load from discharging your battery to the point of causing damage. If you have a load that requires more than Amps, you can connect it directly to the battery terminals, but don't forget to use a properly sized fuse. The SMC-10 has clearly marked terminals for connecting the solar panels, battery, and the load. This makes it very easy to install, even for the technically challenged. The LED light indicators will display system faults, battery state of charge, load status, and operational status. The controller also has built in internal temperature compensation for more efficient charging. This model is well suited for RV's, boats, campers, remote sites, construction sites, work trucks, and small cabins.


  • Battery voltage: automatically detects 12 or 24 Volts DC
  • Maximum PV open circuit voltage (Voc): < 47 Volts DC
  • Maximum short circuit current (Isc): 10 Amps
  • Rated current on load terminals: 10 Amps
  • Usable temperature range: -25°C to +50°C (-13°F to +122°F)
  • Compliance: CE marked and ISO-9001 ISO-14001
  • Dimensions: 5.71 x 3.94 x 0.94 inches
  • Weight: 0.33 pounds
  • 2 year warranty
Additional Information

Additional Information

Bundle Pre-Configured Price No

Samlex SMC-10 SpecificationsSamlex SMC-10 Specifications

Samlex SMC-10 ManualSamlex SMC-10 Manual