SolarEdge Module Frame Mounted P300-5NC4AFS DC Solar Optimizer 300 Watts
SolarEdge P300-5 Solar DC Optimizer for 300 Watts and 48VDC on 60 Cell Modules
NOTE: This optimizer does not require drilling into the frame or modifying it in any way. It is compatible with frames with thicknesses of 0.043 to 0.09 inches.
The SolarEdge Power Optimizer is a device that connects directly to your solar module and uses MPPT technology to optimize the DC power before sending it to the inverter. This model optimizer mounts directly to the frame of the solar module. The Power Optimizer is very similar to a microinverter. However, the Power Optimizers do not actually invert the DC power to AC power. The optimizers allow you to see system performance and diagnostics at the module level, similar to a microinverter, yet they last much longer due to the type of electronics used in the device. Microinverters have a much shorter lifespan vs a power optimizer. The SolarEdge optimizers come with a 25 year warranty, which means it's not too likely that you will ever have to service any of the devices once they're installed. Unlike a microinverter system, the Power Optimizers feed DC energy into a specifically designed inverter that maximizes the efficiency and output of the solar array.
Model number: P300-5NC4AFS
Mount type: Railess frame mounted
MPPT operating range: 8 - 48 VDC
Max short circuit current: 10 Amps Isc
Max DC input current: 12.5 Amps
Max efficiency: 99.5%
Max output current: 15 Amps
Max output voltage: 60 Volts
Dimensions: 5.47" x 6.5" x 1.61"
Weight: 1.94 lb.
Connector type: MC4 Input, H4 Output
25 year warranty