Solartech SPM085P 85 Watt, 12 Volt Solar Module
Note: The Solartech SPM085 module is also available in 24 volts DC.
The Solartech SPM085P solar module is ideal for RV's, off-grid battery charging, powering remote communications equipment, small water pumping systems, and residential or commercial grid-tie systems. It's constructed using high efficiency multicrystalline 6 inch cells that are situated below a low iron tempered glass face. The frame is made of light weight, durable anodized aluminum. This module comes with prefabricated MC4 connectors on the ends of 3 foot positive and negative wires. This module is certified to meet UL1703, IEC61215, TUV, and ETL Class I-Division 2-Groups C and D. Its warranty guarantees 90% of the rated output after 12 years and 80% after 25 years. If you will only be using one of these modules, we recommend the Morningstar SunSaver 6 Amp solar charge controller. If you need extra wire length, the MC4 extender cables can be used. If you are unsure about your setup and need some advice, please email us or call and speak to one of our sales staff. We will be more than happy to help you design your system.
Specifications for Solartech SPM085P Solar Module
Max Rated Power (Pmax) 85 Watts Voltage at Max Power (Vmp) 17.9 Current at Max Power (Imp) 4.84 Amps Open Circuit Voltage (Voc) 21.9 Short Circuit Current (Isc) 5.17 Amps Module Efficiency 12.53% Max. System Voltage 1000 VDC Length x Width x Depth (inches) 39.9 x 26.3 x 1.38 Weight of Panel (Pounds) 20.0 Connector Cable Type MC4 Latching Cables (3 feet)
The 24 Volt model has a maximum power voltage (Vmp) of 34.5 Volts, an open circuit voltage (Voc) of 42 Volts, a maximum power current (Imp) of 2.48 Amps and a short circuit current (Isc) of 2.62 Amps.
- Additional Information
SKU SPM085P-TS-N Bundle Pre-Configured Price No
For the IronRidge XRS or XRL rail mount system:
- 1.41" end clamp (29-7000-224)
- 2.00" mid clamp (29-7000-105)
Customer ReviewsNo reviews have been found