UPG Universal Battery UB121100 110 Amp-hours 12V Sealed Lead Acid AGM Battery with Stud Terminals

Universal UB121100 (D5751) 12V SLA AGM 110Ah Deep Cycle Battery

NOTE: If you need help determining the correct wire size, breaker size, or fuse size for your battery system, please give us a call or email us and we will be happy to assist you.

Applications: Solar power, wind power, marine and RV house power, deep cycling, commercial and residential installations.

UPG discharging recommendation: this battery should not be discharged beyond a 40% depth of discharge (DOD). That means the battery should retain no less than 60% of its rated capacity. If the battery is drawn below that threshold, it could prevent the battery from returning to a full charge.

When you need a rugged battery that meets high quality and performance standards, while still being cost competitive, the Universal Power Group (UPG) Universal line of sealed lead-acid (SLA) batteries are perfect. Absorbed glass mat (AGM), also known as valve regulated lead-acid (VLRA), is a technology that allows the use of proven lead-acid battery technology but without the hassle of routine battery maintenance such as checking the water levels for the proper amount of electrolyte. The glass mat material absorbs and releases the excess gas and water during the charge and discharge cycles. Since the batteries are sealed, spill proof, and leak proof, they can be installed in most locations and any orientation. The Universal batteries are designed to be deep cycled, which means they will hold up better than standard batteries in applications that require frequent charging and discharging, without adversely affecting the overall performance or capacity.

Experience matters in the battery industry and UPG has perfected the business model since their beginning in 1968. UPG takes the quality of their products very seriously. They are an ISO 9001:2008 certified company that abides by very strict quality management standards. Battery inventory is rotated on a regular basis to prevent spoilage and every battery is top charged before leaving the warehouse. This ensures that your batteries will arrive healthy and ready to be installed upon delivery. The Universal line is well suited for both solar and wind power applications. When combined with a properly sized solar array or wind turbine, these batteries will give you years of energy storage at a much lower cost than the name brand alternatives. UPG promises exceptional quality, environmental responsibility, excellent value and reliability for all your renewable energy storage needs.

Specifications:

• Model number: UB121100
• UPG number: D5751
• Nominal voltage: 12 Volts DC
• Nominal capacity at 77°F: 110.0 Amp-hours (Ah) at 20 hour rate
• Group Size: 30H
• Maximum charging current: 33 Amps
• Internal resistance: 5 megohms
• Terminals: L Series stud terminals
• UL recognized under file number MH 20567
• Weight: 65.7 lb (29.8 kg)
• Dimensions (inches): 12.97"L x 6.89"W x 8.4"H; Total height: 9.32"

1 year warranty

We also offer many options for battery interconnect cables, inverter cables, and wire that can be used with these batteries. Please see our wiring section for all available products. You'll also want to be sure to incorporate the proper overcurrent protection for your battery system. We carry a large selection of both circuit breakers and fuses. If you have any questions, give us a call or email us.