Conext 80 Amp MPPT 600 VDC Charge Controller
Note: In order to program this controller, you will need the XW system control panel XW-SCP.
This is the new Conext XW MPPT 80 amp, 600 volts DC charge controller by Schneider Electric. It's the highest voltage controller available. When dealing with very high power solar arrays, wire size and the distance from the charge controller are critical design elements. The 600 volts DC input limit allows for a higher string voltage and and overall higher system efficiency. This model is perfect when your solar array must be mounted far away from the charge controller. If you simply configure your array for a higher voltage, you can deliver the power to the controller using a smaller wire size. When you consider the cost savings by using a smaller wire size, this controller may end up saving you a substantial amount of money on installation. This controller may also be used to charge batteries from high voltage grid tie arrays.
Device Name XW-MPPT80-600 Battery Voltage 24 Volts DC 48 Volts DC Input Voltage Range 195VDC to 600VDC (open circuit) Cable Entry 7/8" and 1" knock-outs Wire Gauge Range 14 AWG to 6 AWG Weight 30 lbs. Enclosure Material Sheet metal chassis Ambient air temp. -20° to 45° C -4° to 113° F Operating altitude 0 to 2,000 meters 0 to 6,561 feet Standards CSA 107.1 UL 1741 Certifications FCC Class B Dimensions 30" x 8.6" x 8.6"
5 year warranty
- Additional Information
SKU XW-MPPT80-600 Bundle Pre-Configured Price No
Customer ReviewsNo reviews have been found